Victony WiFi Extender Not Connecting to Router?
Are you trying to connect your Victony WiFi extender to your router, but unable to do so? If yes, then know that we have got you covered. Here, we will provide the best hacks through which you can do away with the “Victony WiFi extender not connecting to router” issue in a flash. Let’s start!
Fixed: Victony WiFi Extender Not Connecting to Router?
Fix 1: Reduce the Distance between Devices
The distance between your devices plays a very important. So, if your extender and router are placed at a distance, then you are surely going to face issues while connecting them. So, what you have to do, place them in the same room and main a safe distance between them.
Once you are done reducing the distance between them, try to connect them and see if this time you rack up success or not.
Fix 2: Check the Connection Source
Still getting the same error? If yes, then what source you have used for connecting your devices? Is it an Ethernet source? Yes? Then, the wire you have must be in working condition. On the off chance, there are cuts or damages in the cable, replace it right now. Replacing the cable is not enough! You have to insert it firmly into the correct ports of your extender and router.
No Luck?
If the above-mentioned fixes doesn’t bring you luck, then we suggest you opt for a wireless source for connecting them.
Fix 3: Restart Your Devices
Restarting is the most effective fix that you can try to troubleshoot “Victony WiFi Extender Not Connecting to Router” issue. The reason is, due to a minor technical glitch in the extender, you might get issues while connecting your devices.
To make the most out of your devices, take the plunge to restart the extender by following the guidelines provided below:
Step 1: First, you have to unplug your WiFi range extender.
Step 2: Wait for a few seconds.
Step 3: Plug in back your extender and wait for the LEDs on it to start blinking. Wait till they get stable!
Once you are done restarting your WiFi extender, apply the same process on your router as well!
Now, try reconnecting your WiFi range extender to your router and see if this time you are able to complete the process. If yes, then verify the connection between them by accessing the Victony extender login page.
Still Getting the Same Error?
Even after a lot of trials are you still going nuts because of the same issue? Need not to worry! Just ensure that you haven’t placed your devices inside your show window. If you have done so, then your devices will get issues while communicating. Hence, place your devices over a higher shelf.
Moreover, we do not suggest our users to place their Victony WiFi extender and router beneath your study table.
Here’s to hope that you are able to connect your devices now. In the event, your answer is still in no, then resetting is the only option you are left with.
How to Reset Victony WiFi Extender?
The Victony extender reset process is one of the finest solutions to fix major issues related to it.
Therefore, scroll sown a little and know how to reset your Victony Wifi range extender in minutes:
- Ensure that your extender is receiving a steady power supply from its respective socket.
- Ensuring a continuous power supply to the extender, locate and press the reset button on it, and hold it up for some time.
- Release the extender’s reset button and do the Victony extender setup from scratch.
For setting up Victony device, you have to make an extender-router connection using either a wireless or an Ethernet source.
This was all about our piece of writing about how to fix “Victony WiFi extender not connecting to router” issue. Anticipating that you find the blog post helpful!
