Victony WiFi Extender WA1200

Eliminate the dead zones in your house with the help of the Victony WiFi extender WA1200 setup. It’s one of the popular WiFi extenders introduced in the market. Its easy and simple-to-use feature makes it one of the favorites among its users. However, some users experience a lot of technical hiccups while performing the Victony WiFi extender WA1200 setup. If you are also having the same fate and facing issues while performing the Victony WiFi extender WA1200 setup process, then this page will guide you to perform the Victony setup without any hurdles. Just have a glance at the below section.

You can perform the Victony WiFi extender WA1200 setup in three modes:

1. Repeater Mode
2. Client Mode
3. Access Point Mode

Victony WiFi Extender WA1200 Setup In Repeater Mode

Adjust the mode selector on the repeater to the Repeater Mode before beginning the Victony WiFi extender WA1200 setup process.

Using WPS button

• Turn on your Victony WiFi extender WA1200 after plugging it into a power outlet.
• Next, press the WPS button on the Victony WA1200 extender.
• Thereafter, press the WPS button on your home router.
  Important Note: The WPS button may be located at a different place on different models.
• Finally, you have completed the Victony WiFi extender WA1200 setup process.

If you have any questions while executing the aforementioned steps, then please contact our IT professionals as they are available 24/7 for your support.

Using an Internet Browser

• Turn on your computer as well as your Victony WiFi extender WA1200.
• To access the Victony WiFi extender WA1200 login page, open an upgraded version of the Internet browser on your PC and type the default IP address in the address field.
• Press the Enter key on your keyboard.
• You’ll be directed to the login screen for the Victony WiFi extender WA1200, where you’ll need to enter the default username and password in their specific field.
• Fill in all the asked information and click OK to continue.
• Click Next to continue.
• After clicking the Next button, a dialogue window with a successful message will appear on your screen.

Finally, your Victony WiFi extender WA1200 setup is completed. If you experience any issue while performing the Victony WiFi extender WA1200 setup, then please contact our professionals.

Victony WiFi Extender WA1200 Setup in Client Mode

Set the Mode selector button on your Victony extender to Client Mode.

Using the WPS button

• After connecting your Victony WiFi extender WA1200 to the power socket, turn it on.
• Next, click the WPS button on your extender.
• Press the WPS button on your home router in the same way.

Finally, your Victony WiFi extender WA1200 setup is completed in client mode using the WPS method. If you get stuck with an issue, then feel free to contact our experts.

Using the Internet Browser

• Turn on both your computer and your Victony WiFi extender WA1200.
• On your computer, open the most recent version of your web browser and type the default IP address into the address area.
• You will be directed to the login page for the Victony WiFi extender WA1200, where you need to enter the default username and password.
• Click the OK button once you’ve input all of the required credentials.
• Then, the Victony WiFi extender WA1200 setup wizard will appear.
• Once you’ve connected, you’ll receive a successful message.

After that, your Victony device will restart automatically, and you can access the high-speed internet connection.

Victony WiFi Extender WA1200 Setup in Access Point Mode

Adjust the Mode selector button on the Victony extender to Access Point.

Via WPS Button

• Turn on your Victony WiFi extender WA1200.
• Push the WPS button on your Victony extender.
• The LED on the Victony WiFi extender WA1200 will begin to blink when you hit the WPS button.
• Similarly, push the WPS button on your home router.

After that, your Victony WiFi extender WA1200 setup using a WPS button is completed in the Access Point mode.

Using the Internet browser

• Switch on both the computer and the Victony WiFi extender WA1200.
• On your computer device, open an upgraded version of the internet browser and type the default IP address into the address bar.
• Press the Enter key.
• You will be navigated to the Victony WiFi extender WA1200 login screen, where you are required to input the default username and password and then click OK.

Finally, your Victony WiFi extender WA1200 setup is completed. For any queries, connect with our customer support team for instant solutions.

Reasons Behind Victony WiFi Extender WA1200 Setup Issues

• There could be a problem with the power outlet where the Victony WiFi extender WA1200 is plugged in. A power loss can cause by a short-circuited or faulty power socket that can result in Victony WiFi extender WA1200 installation issues.
• Using an old internet browser can also be one of the reasons behind the Victony WiFi extender WA1200 setup issues.
• Using the incorrect web address to reach the Victony WiFi extender setup page can cause an issue. Therefore, always cross-check the web address you have entered before hitting the Enter button.
• You may be experiencing Victony WiFi extender WA1200 setup issues due to a disturbance in your WiFi signals. Therefore, avoid placing your WiFi repeater close to objects such as refrigerators, microwaves, cordless phones, and other smart home appliances as they emit radio frequency for transmissions.

Troubleshoot: Victony WiFi Extender WA1200 Setup Issue

Here, we are discussing the basic troubleshooting methods to resolve the extender setup issue.

Reboot Your Repeater:

Before implementing any other troubleshooting methods, consider rebooting your Victony extender. It will fix minor technical bugs that are forcing you to face the Victony WiFi extender WA1200 issuea.
To reboot:

• Disconnect all devices accessing your extender.
• Remove your Victony WiFi extender WA1200 from the power outlet after switching it off.
• Then, wait for some time before connecting your repeater to the power socket.

Turn it on and see if the issue you were facing has been fixed or not. If not, then scroll down to the next troubleshooting technique.

Verify Your Internet Connection

Ensure that your Victony WiFi extender WA1200 is getting a stable internet connection. In some cases, while using a wired connection, users get stuck with an issue due to damage to the Ethernet cable. If you are also in the same boat, then inspect your Ethernet cable. If you detect any damage to it, then replace it with the new one. Moreover, if you are using a wireless connection, then ensure that your Victony WiFi extender WA1200 is getting proper WiFi signals. If that’s not the case, then try relocating your WiFi repeater close to your host router to avoid any network issues.

Check the Power Supply

A reliable power supply is needed for the Victony WiFi extender WA1200 to work efficiently. Any faulty power socket can cause trouble. So, try switching to another power socket if you detect any damage to the power socket. Moreover, ensure that the AC cable you are using is in workable condition. Else, fix or replace it to avoid any power outage that might lead you to face the Victony WiFi extender WA1200 setup issue.

After going through the aforementioned troubleshooting hacks, you’ll be able to perform the Victony WiFi extender WA1200 setup without any stress. If you still have any issues, then reach out to our customer support team as they are available 24/7 in your services.