Fix: WPS Light Blinking on Victony Repeater
Wireless-N Repeater gives you access to high-speed internet. Having stable LED lights on the wireless repeater means everything is working perfectly. However, a sudden WPS light blinking might completely ruin your user experience. What will you do in that case? Do you have any idea about the WPS light blinking issue? No? Fret not! We are here to assist you with the WPS light blinking issue.
But before that, let’s understand what WPS light signifies. Also, you must know what are the causes behind the issue. Once you know that, you can easily resolve the WPS light blinking issue. So, without further ado, let’s get started.
What Does WPS Signify on Wireless-N Repeater?
For starters, WPS stands for ‘WiFi Protected Setup’. It means that when you enable the WPS feature, your Wireless-N Repeater gets a secured WiFi network. No unauthorized devices can interfere with the repeater’s working. Usually, there are WPA2 and WPA3 settings for the WPS mode.
Enable the WPS method using two distinct ways.
- Push-Button
- Password-Protected
Hence, use the method that seems easier. Let’s know what could lead to WPS light blinking issue on your Wireless-N Repeater. Read on.
Causes: WiFi Light Blinking on Extender
- Outdated Firmware
- WiFi Interference
- Repeater Away From Host Router
- Unstable Power Supply
- Loose Connection With Router
Since we know the reasons for WPS light blinking issue, troubleshooting the issue becomes a lot easier. Get going.
Solved: WPS Light Blinking on Wireless-N Repeater
Check Power Socket
Without a proper supply of electricity, the Wireless-N Repeater can’t perform to its maximum potential. An unstable power supply means the wireless repeater can’t sustain a stable internet connection. It will keep disconnecting. That is why you are facing the WPS light blinking issue.
So, the first step should be to check the power socket. It must not be blackened or have signs of short-circuiting. Moreover, the extender pins should fit perfectly into the wall socket. In case the wall switch is damaged, either get it repaired or change the wall outlet.
Re-establish Extender-Router Connection
The poor connectivity between the Wireless-N Repeater and router could be another reason behind the WPS light blinking issue. It might have happened while doing the WiFi repeater setup.So, you need to check the connection types used by the devices.
If the connection is wireless, it could be fixed by bringing the devices closer. However, if the connection used is wired, you need to inspect the Ethernet cable. Make sure the cable is not corroded, has cuts, or is worn out. Moreover, it should fit perfectly into the device ports for the best internet connection.
Update Firmware
Outdated firmware leads to numerous other issues apart from the one at hand. Moreover, with outdated firmware, the repeater can’t give out the best performance. So, to fix issues like the WPS light blinking, you need to do the firmware update.
There are two methods to do the Wireless-N Repeater firmware update.
- Manual Method
- Automatic
In this method, you download the latest firmware and manually upload it to the repeater server.
It comes in handy when you turn on the auto-update feature of your Wireless-N Repeater. Once you do that, it will automatically download the latest firmware and updateit automatically.
Get Rid of WiFi Interference
WiFi interference is quite common due to numerous household items. A few examples that cause WiFi interference are microwaves, refrigerators, baby monitors, cordless phones, mirrors, fish tanks, metal objects, and many more objects. Apart from that, incorrect repeater placement can further lead to the issue at hand.
So, you need to avoid the objects mentioned above while doing the Wireless-N Repeater placement. Along with that, make sure you don’t place the repeater close to a window. Keep the smaller details in check while placing your extender.
Reset Repeater
In case no troubleshooting tip works to resolve the WPS light blinking issue, just go for the reset. Press the Reset button on your wireless WiFi repeater. That will restore the device to its factory settings. Hence, the issue will be resolved after you do the WiFi repeater setup.
To do the Wireless-N Repeater setup, you need to use the default IP. Hence, enter 192.168.0.2in the web browser you are using for the setup process. When you keep everything in check, the WPS light blinking issue will be resolved. Hence, you get access to a blazing-fast internet connection.