Experiencing Wireless-N Repeater Upgrade Failed Issue? Let’s Fix It!
Have you recently tried upgrading your Wireless-N repeater and encountered an upgrade failure? If yes then don’t worry. You’re not alone who is facing this issue. In fact many other users around the globe are stuck in the same. If you want to fix this problem in no time, then read this entire blog. Here, we’ll discuss some common reasons that might cause upgrade failures and simple solutions to fix them. So, let’s dive right in!
Reason Why Wireless-N Repeater Upgrade Failed
Here we’ve discussed some reasons with you that mostly trigger the Wireless-N repeater upgrade failed issue. By knowing the contributing factors you will be able to fix it in no time.
Unstable Internet Connection
An unstable connection might disrupt the upgrade process and lead to failure because while updating the firmware, your device should be connected to a stable internet connection.
WiFi interference in the networking device causes the firmware failure issue as it weakens the strength of the network.
Too Much Distance between Devices
The excessive distance between the extender and the host router also could be the reason behind the firmware update failure. Due to long-distance devices did not communicate with each other.
An outdated version of the internet browser also leads to firmware failure issues because the outdated browser does not support internet activities sometimes.
Technical Glitches Existence
Temporary hiccups in the extender caused the Wireless-N repeater upgrade failed issue. These hiccups occur due to over-usage of the device.
Downloaded Wrong Firmware Version
Maybe you download the wrong firmware version for your Wireless N repeater which is not compatible with your device firmware.
Thus, these were the reasons that forced you to face the Wireless N repeater firmware upgrade failed issue. But, you don’t need to worry because we have suitable solutions for you that you can implement to fix the problem in no time.
Solutions: Wireless-N Repeater Upgrade Failed
Check Internet Connection
Ensure that your extender is working correctly and that your device is connected to the correct network before attempting the upgrade again.
Check the Firmware Compatibility
Double-check the repeater’s model number and visit the official website to ensure you’re downloading the correct firmware version for your device. Once you download the right version, then upload it by accessing the myrepeater.net default web address of the device.
Clear Cache & Cookies
Clear your browser’s cache, cookies, and history before attempting the upgrade again. This helps ensure that you’re downloading a fresh copy of the firmware.
Use a Different Device or Browser
Now you should try using a different device or web browser. Compatibility issues between certain devices and browsers can occasionally lead to glitches during the upgrade process.
Temporarily Disable Firewall and Antivirus
Sometimes, firewalls and antivirus software can interfere with the upgrade process. To rule out this possibility, temporarily disable your firewall and antivirus before initiating the upgrade. Don’t forget to re-enable them once the upgrade is successful.
Stable Power Supply
Make sure your repeater is connected to a stable power supply throughout the upgrade process. Power fluctuations can disrupt the upgrade and lead to failures.
Remove the Wireless Interference
To remove the WiFi interference from the device, you can follow the following steps:
- Avoid placing Bluetooth gadgets near networking device.
- Move devices closer to your router.
- Do not place the metal objects near the networking device.
- Try to elevate the extender from the floor and place it at the center of the house.
Reboot the Extender
If you are still in the same situation and none of the above solutions assisted you, then reboot your device. By doing this you will able to fix the minor box and able to remove the technical glitches from the device.
To reboot the extender, you need to remove it from the socket. Press the power button to turn it off. Now, wait for some time. Plug the extender back into the wall outlet and turn on it. Now your device has been rebooted successfully.
Hence, this is how you can fix the Wireless-N repeater upgrade issue in no time. You just need to follow the above-mentioned solution. Once the issue is resolved, you will able to upgrade the firmware of your Wireless N repeater.