Detailed Guide to Perform Victony WA1200 WiFi Extender Setup
Victony has gained a number of users across the globe due to its impressive product line. Range extenders manufactured by Victony have raised the bars high for their contemporaries. From offering an ultra-fast internet connection to its accessibility on multiple devices at the same time, Victony range extenders house too much for their users. But, the product that has captivated massive users is Victony WA1200 range extender. However, to avail of its phenomenal features, you need to perform Victony WA1200 WiFi extender setup first. Are you ready to know about the setup process? Let’s get started.
Before Victony WA1200 WiFi Extender Setup
Here are a few things that you should have access to in order to achieve success with the Victony WA1200 WiFi extender setup process:
- A power outlet that is located near the existing networking device
- The default web address as well as login credentials of your Victony WA1200 extender
- A wired source i.e. a network cable to create a connection between your WiFi devices
- A device with a web browser installed on it
Done with the prerequisites? Great! Now, let’s move to the process of setting up the extender. This is to inform you that Victony WA1200 WiFi extender setup can be done in repeater, AP, or client mode. You can make the device up and running as per your preference. Refer to the next section to know about the extender setup process.
Victony WA1200 WiFi Extender Setup Steps
1. Decide the Extender’s Location
The placement of the extender is the most overlooked factor during the Victony WA1200 WiFi extender setup process. So, let’s start with the extender’s location. First of all, the extender is supposed to be in the same room as the host networking device. Secondly, the room should not be a shelter to devices that produce radiations, surfaces causing reflection of signals, or objects that are good conductors of electricity. Such things can interfere with the WiFi signals of your Victony WA1200 range extender in one way or another.
2. Power Up the Extender
As soon as your extender seats comfortably in a non-interference zone, consider connecting it to a wall outlet. Once done, press the Power button. However, you need to be cautious while selecting the wall outlet. After all, you cannot afford to face issues during Victony WA1200 WiFi extender setup due to fluctuation in power supply. So, do not even think about using a damaged wall socket for powering up your WiFi device.
3. Connect Your WiFi Devices
It is time to bring a network cable into play. But, before doing so, consider checking its physical status. Does it possess any deep cuts? No? Well, then you are good to go. Form a finger-tight connection between your Victony WA1200 extender and the existing networking device. What happened? Don’t like wires? Worry not! Victony also facilitates its users to connect their devices wirelessly. So, feel free to take the assistance of a wireless source for the setup process.
4. Access the Victony WA1200 Login Page
The next step that needs to be given followed to complete the Victony WA1200 WiFi extender setup process is to access the login page. So, switch on your favorite device (computer or laptop) and pull up a web browser that you use often. Thereafter, move to the address field and input the default Victony login web address into it. Press Enter to reach the admin page of your wireless device.
5. Log in to the Extender
On the admin page of your Victony WA1200, key in the default password and username. However, the entree should be done carefully. Right after that, hit Login. You will soon see the Victony WA1200 WiFi extender setup wizard. A few on-screen prompts will welcome you. Walk through them and finish setting up your WiFi device.
That’s it! The Victony WA1200 WiFi extender is ready to serve its purpose. So, move anywhere in your house and access the internet the way you fancy.
What’s Next?
We hope that after walking through the above-mentioned steps, you will get Victony WA1200 WiFi extender setup success. However, some settings are required to be tweaked after the extender’s configuration. To know about those settings and their management process, approach our professionals. They will provide you all the necessary information to manage the extender’s settings.